http://192.168.1.1 or http://192.168.100.1. 2) In WAN Configuration, locate the Internet TR069_INTERNET profile. Change mode from Route to Bridge, or unbind LAN Port 1. 3) Connect LAN Port 1 to the WAN port of your personal router (ASUS, UniFi, Netgear). 4) In your personal router, configure WAN 802.1Q VLAN Tagging (VLAN 20 or 21 for Etisalat; VLAN 10 for STC) and input your PPPoE credentials. This eliminates Double NAT and unlocks gigabit speeds.
Telecommunications Architecture: Triple-Play VLAN Segmentation in the Gulf
Telecommunications operators across the Gulf Cooperation Council (GCC)—including e& (formerly Etisalat UAE), du Telecom, Saudi Telecom Company (STC), Mobily, and Ooredoo—deploy fiber-to-the-home (FTTH) infrastructure utilizing Gigabit Passive Optical Networks (GPON). Under this architecture, a single fiber strand delivers three independent services (Triple-Play) partitioned using IEEE 802.1Q VLAN tagging:
- High-Speed Internet (HSI): Encapsulated inside a dedicated VLAN tag with high bandwidth allocation.
- IPTV (eLife TV / Jawwy TV): Multicast video streams requiring IGMP snooping isolated on a separate VLAN.
- VoIP Landline Telephony: Encrypted SIP signaling prioritized with high DSCP QoS metrics on a third VLAN.
When you attempt to connect a third-party wireless router directly without configuring 802.1Q VLAN tagging, the ISP optical line terminal (OLT) at the central exchange discards all untagged Ethernet frames, leaving your router unable to negotiate WAN IP addresses.
GCC Fiber Operator VLAN & Credential Matrix
| Operator & Country | Standard ONT Hardware | Internet VLAN ID | WAN Authentication Type |
|---|---|---|---|
| Etisalat by e& (UAE) | Huawei HG8240H / EchoLife HG8247 | VLAN 20 (or VLAN 21) | PPPoE (User/Pass on welcome SMS) |
| du Telecom (UAE) | Nokia G-240W-A / D-Link DPN-FXN | Untagged / VLAN 30 | DHCP (IPoE) Dynamic WAN |
| STC Fiber (Saudi Arabia) | Huawei HG8245Q / ZTE F670L | VLAN 10 | PPPoE (Dialup from STC 900) |
| Mobily Fiber (KSA) | ZTE F680 / Huawei HG8145V5 | VLAN 100 | PPPoE Authentication |
Step-by-Step Configuration Walkthrough
- Log in to the ISP ONT Console:
- Connect your laptop via Ethernet to LAN Port 2 or 3 of the Huawei/D-Link ONT.
- Navigate to
http://192.168.100.1(Default credentials:telecomadmin/admintelecomor credentials printed on label).
- Configure Bridge Mode on LAN Port 1:
- Go to WAN → WAN Configuration.
- Select the existing
TR069_INTERNET_R_VID_...profile. - Under Port Binding, uncheck LAN 1.
- Create a new WAN connection: Mode set to Bridge WAN, Bridge Type: IP_Bridged, and bind strictly to LAN 1.
- Leave IPTV and VoIP bound to LAN Ports 2, 3, and POTS telephone jacks so landline and television services remain uninterrupted.
- Configure Personal Router (e.g. ASUS / UniFi / TP-Link):
- Connect a Cat6 cable from ONT LAN Port 1 into the WAN port of your personal router.
- Log in to your router dashboard at
192.168.1.1. - Navigate to LAN → IPTV / Special ISP Settings.
- Select Manual Setting. Set Internet VLAN ID to
20(Etisalat) or10(STC) with 802.1p priority0. - Switch WAN connection type to PPPoE. Enter your username (e.g.,
[email protected]) and secret password. Save settings.
Frequently Asked Questions (FAQ)
Will setting my GCC ONT to bridge mode disconnect my landline or television?
No. By bridging only LAN Port 1 for Internet and leaving LAN Ports 2/3 and POTS telephone jacks bound to their respective IPTV and VoIP VLANs, your landline phone and TV set-top boxes continue functioning normally.
How do I recover my Etisalat PPPoE password if I lost the SMS?
You can retrieve or reset your PPPoE credentials instantly by logging into the official e& UAE (My Etisalat) app or by calling 101 from your registered mobile number.
Does bridging the ONT eliminate Double NAT for online gaming?
Yes. Bridging completely disables the ONT's internal NAT translation and firewall, assigning the public WAN IP directly to your personal router. This resolves all Double NAT conflicts and unlocks Open NAT on PlayStation and Xbox consoles.
Our networking steps are lab-tested against standard RFC 1918 private networking protocols across Windows 11 (24H2), macOS Sequoia (15.1), iOS 18, and Android 15. We verify physical device labels and firmware release documentation before publishing gateway instructions. Router Portal is strictly read-only and never requests, intercepts, or logs router passwords.