What this page covers
Compare the time of failure with lease details and test another client on the same network.
Step-by-step workflow
- Note the approximate failure time and interface.
- Inspect lease obtained, expiry and DHCP-server fields.
- Compare wired and Wi-Fi clients if both are available.
- Review router logs only after redacting private identifiers.
Decision table
| Check | What it tells you | Safe next action |
|---|---|---|
| All clients renew poorly | DHCP service or upstream path | Check router and provider status |
| One client only | Adapter, driver or sleep behavior | Update or reset only that profile |
| Network changes at renewal | VLAN/bridge or roaming transition | Review topology and logs |
Limits and verification
Lease durations and UI labels differ by router. Do not publish a universal lease time as a fix.
Official sources
- IETF RFC 2131 — Dynamic Host Configuration Protocol (DHCP message and lease concepts)
- Microsoft — Essential network settings and tasks (Windows network fields and commands)
Related Router Portal guides
Router login troubleshooting · Router security guide
Keep in mind: Firmware, operating-system menus, ISP policies and regional radio rules can change. Confirm the current official source and exact device before applying a setting.
Our networking steps are lab-tested against standard RFC 1918 private networking protocols across Windows 11 (24H2), macOS Sequoia (15.1), iOS 18, and Android 15. We verify physical device labels and firmware release documentation before publishing gateway instructions. Router Portal is strictly read-only and never requests, intercepts, or logs router passwords.